01761 472 524


ECU-Master 7 inch ADU (Autosport)



Ecu master Autosport version of this ADU 7inch display comes with the Motorsport (deutch) style harness connector


The ADU comes with multiple pre-configured pages, which can be customized by the end user to display data required at every race stage (e.g. practice, qualification, race, troubleshooting, etc.) and changed manually or automatically (based on an advanced conditions system). Each channel displayed on a page (gauges, icons, texts, etc.) can be easily modified using user-friendly, Windows based software. Our comprehensive overlay system facilitates a multiple page display for important data (e.g. low oil pressure, best lap, etc.) independently of the actual page displayed.

To communicate with you dashboard you would need CAN bus interface , is possible to use PEAK -System or Kvaser interface or Ecumaster - most cost effective option.
Our interface can be found here

Lap timer:Lap timer with memory, predictive timing, triggered by a beacon or GPS
Customization:48 available pages, user defined content, custom graphics allowed
Functions:User configurable maths and logic
Overlays:Yes user defined
CAN stream:User defined, up to 48 input messages, predefined streams for popular ECUs
General specification
Operating voltage:6-22V, immunity to transients according to ISO 7637, with reverse polarity protection
CPU:32 bits, automotive, 90MIPS
Temperature range:-30°C to 80°C
Enclosure:Anodized aluminium, CNC machined, IP61
Connection:Automotive 36-way AMP
ADU 5":Antiglare TFT, 800x480, active area 108x64.8 mm, luminance 600 cd/m2
ADU 7":Antiglare TFT, 800x480, active area 154.08x85.92 mm,
Alarms:15 x ultrabright RGB LEDs used for alarms and shift lights
CAN:2x CAN 2.0B (250, 500, 1000 kbps) independent
Serial:RS232 (Rx, Tx)
USB:Yes, for data logging
Analog:8 analogue inputs, 10 bits, 500Hz, software selectable pullups/pulldowns
Digital8 inputs with user defined sensitivity
Aux outputs2 x protected 3A low side outputs
Memory:USB Flash Memory
Accelerometer:3 axis gyro and 3 axis acceleration
Light sensor:Yes for auto brightness functionality
Temperature sensor:Built in to trace device internal temperature
Real time clock:yes with internal power supply